Tom Chathams desk is littered with gemstones. Rubies, sapphires, and emeralds are scattered like pieces of candy. Some of them are as big as golf balls.
Were sitting on the seventh floor of a building in downtown San Francisco, upstairs from the famous jewelry store Tiffany & Co. But Chatham didnt buy these gems at a jewelry store. His company, Chatham Created Gems & Diamonds, made them in its laboratories.
Lab-made gemstones can appear similar to those that form in Earth. This sapphire was made by Chatham Created Gems & Diamonds.
Chatham Created Gems & Diamonds
Usually, gemstones form below Earths surface. They can stay buried for many millions of years. But Chatham and other scientists are creating gemstones on their own. They do this by mimicking the processes that occur underground or by coming up with entirely new processes. Lab-made gems have the same appearance and basic chemical structures as the natural ones, and they can be produced in months or even days.
Because these gems are created in the laboratory, researchers can control the gems formation very carefully. Some lab-grown gems are even purer or tougher than natural gemstones. And the gems are good for more than just jewelry. They can be used to make tools, such as lasers and drills. Lab-made diamonds could even help scientists improve electronic devices or detect dangerous bacteria in drinking water.
The first emerald that Carroll Chatham made in his fathers basement.
An accidental emerald
But making gemstones isnt easy.
Chathams father, Carroll Chatham, became interested in the problem when he was only a teenager. Carroll had read about a scientist who tried to create diamonds, and he wanted to try making diamonds too.
Carroll had already built a laboratory in his fathers basement. For his experiment, he heated up iron and a soft black material called graphite, then dropped the melted mixture into a very cold substance: liquid nitrogen. It exploded.
Almost blew up his fathers house, says Tom Chatham. The explosion was so strong that it also smashed all the windows in the house across the street.
Carroll didnt give up. He decided to try making emerald instead. For a long time, he couldnt get it to work. Then one day, he left an experiment running and went away to college. While he was gone, Carrolls father shut off the power in the basement and cooled down the furnace holding Carrolls mixture of chemicals. That turned out to be the missing step. When Carroll came back, an emerald had grown.
Cooking up a crystal
Most gemstones are hard pieces of mineral. In nature, some minerals form underground when hot liquid rock magma cools down. Some of the atoms and molecules in the liquid start attaching to each other in repeating patterns, creating a structure called a crystal. If the mineral is beautiful, durable and rare, it is often considered a gemstone. Gemstones also form when minerals are heated up, squeezed, or exposed to new chemical elements.
These diamonds were created by CVD, or chemical vapor deposition, which can form diamonds relatively quickly.
Carnegie Institution for Science
When volcanoes erupt or mountains form, the gemstones get pushed closer to the surface. Or, over time, the rocks above wear away, uncovering the gems underneath.
To make a gemstone in the lab, researchers can imitate the Earths process. Each gem has a recipe with certain chemical ingredients. For example, emerald can be made with aluminum oxide, beryllium, silica, and bits of chromium. Rubies contain aluminum oxide and a little chromium.
Scientists usually melt the ingredients or dissolve them in water or other chemicals. The mixture can get as hot as 1,000 degrees Celsius 10 times hotter than the temperature needed to boil water. Then the liquid is slowly cooled down. The cooling takes energy away from the atoms and molecules in the mixture, and they start to come together into a crystal. The crystal actually grows, as if bricks were arranging themselves into a house.
Because they contain the same ingredients, lab-made and natural gems can be hard to tell apart. But there are tiny differences. For example, many natural gems contain very small amounts of water, but some lab-grown gems do not, says James Shigley, a geologist at the Gemological Institute of America in Carlsbad, Calif. And certain lab-made gems may have bits of platinum that wouldnt be found in natural gems.
While gemstones are forming, they can get traces of other materials stuck inside them, called inclusions. Lab-made gems often contain fewer inclusions than natural gems because scientists can control the growth conditions. Natural gems just represent a fortunate accident in the Earth, says Shigley.
Diamonds are a little different from other gemstones because it takes huge amounts of pressure for diamonds to form. Imagine if the Eiffel Tower was pointed upside down and resting on its tip. Now imagine all that weight is pressing down on a point a few centimeters wide. Thats how much pressure a natural diamond feels deep inside the Earth, says George Harlow, a mineralogist at the American Museum of Natural History in New York City.
And diamonds are made only of carbon, a chemical element found in all living things. If you arrange carbon atoms in layers like sheets of paper, you get graphite a soft material used in pencil lead. But if you connect each carbon atom to four other carbon atoms in a three-dimensional structure, you get diamond an incredibly hard material.
The company Advanced Diamond Technologies Inc. is using lab-made diamond to develop tiny sensors that can detect and signal that bacteria are present in drinking water.
Advanced Diamond Technologies Inc.
A company called Gemesis in Sarasota, Fla., has hundreds of diamond-making machines. The scientists start with a tiny seed, a piece of diamond about the size of a period at the end of a sentence. They put the seed into a ceramic container with graphite and a secret mixture of other chemicals. Finally, they close the container, squeeze it with blocks of metal, and heat it up.
When the graphite dissolves, it separates into individual carbon atoms. The carbon atoms start attaching to the seed, making it grow. Four days later, out comes a diamond, says Karl Pearson, the senior vice president of technology and engineering at Gemesis.
Microwaving a diamond
Other researchers are making diamonds using a method that is completely different from Earths. The process is called chemical vapor deposition, or CVD. With CVD, scientists can make bigger pieces of diamond faster. They can also make thin diamond layers that could be used in high-tech devices.
Researchers at the Carnegie Institution for Science in Washington, D.C., have been working on CVD for many years. They put a penny-sized diamond seed into a chamber and pump out all the air. Next, they inject two types of gas: hydrogen and methane. Methane contains both carbon and hydrogen atoms.
Then we microwave it, says Joe Lai, a materials scientist at the lab. The microwave is similar to the microwave you would use at home to heat up your food, only more powerful. The hydrogen and carbon atoms break apart and then form into one very bright, very hot ball of gas. Carbon atoms bond to the diamond seed, making it bigger and bigger.
The Carnegie researchers have improved the CVD process so that diamonds grow more quickly. In 2002, they showed that their CVD process could grow single diamond crystals about 100 times faster than the microwave method had before. And the team can make their diamonds tougher than natural diamonds by adding a chemical element called boron. The boron keeps cracks from spreading, so its harder to break the diamond apart.
Tattoos, teeth and cell phones
Lab-made gems can be used for more than just rings and necklaces. For example, some supermarkets use sapphire in the check-out scanners. When a cashier needs to find out the price of a product say, a box of cookies a laser beam shines through a sapphire plate to scan a code on the box. Without a hard material like sapphire, the plate would quickly get scratched, and the scanner wouldnt work as well.
The company Gemesis uses special machines (one pictured) to make diamonds.
Rubies are special because they can create laser beams. If you place a ruby rod between two mirrors and flash a very intense light at it, the ruby will shoot out a beam of red light. Ruby lasers can help remove tattoos because the red light breaks down certain colors of tattoo dye in a persons skin.
But perhaps the most amazing gem of all is diamond. Diamond is so hard that it is used to cut rock and drill for oil. If you have ever had a cavity filled at the dentist, a diamond-tipped drill may have been used to remove part of your tooth.
Diamond lets heat pass right through it, so a diamond stays cool. I could take a blowtorch, heat up a diamond till its glowing hot, put it on a metal surface and pick it up a couple seconds later, and it wont be hot at all, says Lai. Instead of holding the heat, the diamond transfers the heat to the metal. And diamond is very stiff, meaning that it is hard to bend.
It really is natures extreme material, says John Carlisle, a physicist and chief technical officer at the company Advanced Diamond Technologies Inc. in Romeoville, Ill.
Some of these properties could make diamond useful in cell phones. With todays cell phones, people can talk to friends, surf the Internet and download videos. When you do these things, the phone uses parts called acoustic filters. Currently, these filters can be made of materials such as quartz or ceramic. Each filter must vibrate at a certain rate in order for the phone to work. Some filters have to vibrate more than a billion times per second.
Because diamond is so stiff, it can vibrate at a very fast rate. Researchers are now working on creating tiny diamond filters, smaller than the width of a strand of hair. These filters could make the cell phone use less power, so the battery would last longer.
Diving boards for bacteria
Lab-made diamond could even be used to help find bacteria in the water that we drink. Bacteria are small organisms that you cant see. Some of them can make you very sick.
Carlisles company is working with researchers at the University of WisconsinMadison and the University of Illinois at Urbana-Champaign on tiny sensors that will detect these bacteria. The sensors have diamond parts shaped as miniature diving boards. To catch the bacteria, the diving boards will be coated with molecules that make the bacteria stick to them.
People could put these sensors in water treatment plants or on sinks in their homes. If bacteria got stuck to them, the diving boards would vibrate a little more slowly than usual. That would send an electrical signal to tell people that the water may be dangerous to drink.
If the diving boards were made of other materials, such as silicon or gold, the molecules that catch the bacteria would fall off after awhile. But with diamond, the molecules stay attached. So researchers can leave the sensors in the water for a long time.
Lab-made diamonds could be better for high-tech devices than natural diamonds because its easier to get large amounts of diamond in the right shape and size. These diamonds could also be used in devices that help blind people see, in radar equipment for the military, and in advanced computers for sending secret information that cant be decoded. Theres just 101 uses for it, says Carlisle.